This is a demo store. No orders will be fulfilled.
EPDM Rubber Flat Roof Membrane – FAQs
Frequently Asked Questions – Rubber Flat Roof. Do you have any other questions for us? Send us an email at: firstname.lastname@example.org or call us on: 01392 927729.
I’m not sure what I need to build my flat roof, what’s the best way to know?
We have the perfect way to rectify this issue, all you need to know is the measurements of your roof and we can do the rest! Check out our Roof Quote Tool by clicking here, input the information which you have about your roof and we will put all the materials which you will need into your basket for you. If you aren’t sure what they are useful for, either check out our step by step videos which can be found here, read the product descriptions, or get in touch.
How long will Rubberall EPDM membrane last?
- The saturated polymer backbone allows for strong resistance to weathering, high heats, and temperature.
- The chemical properties of EPDM result in a very low risk of oxidation and any related damage.
- There is high resistance to water, acid and alkali erosion.
- The EPDM membrane is a non-polar elastomer, which affords it a high electrical resistivity.
- It has flame retardant properties and a highly flexible membrane – capable of up to 300% movement.
Recent studies show that the membrane has a life expectancy of more than 50 years, even when exposed to sunlight. Read more here.
Can certain materials damage Rubberall EPDM?
Rubberall EPDM is less resistant to oil products. Contact with mineral and vegetable oils, petroleum-based products, fresh bitumen and grease must be avoided.
Must the roof surface be cleaned before adhesion of Rubberall EPDM?
The surface must be clean, smooth and dry. The surface must be free of sharp and/or loose objects and/or foreign materials such as oil, grease, and/or other contaminants. Therefore, it is recommended to sweep the substrate with a brush prior to the installation of the membrane or use a leaf blower to blow away any debris.
Can I walk on a Rubberall EPDM roof?
The roof can be accessed for periodical maintenance. In case of regular roof traffic, the membrane must be protected with pavers.
Can Rubberall EPDM be combined with a Green Roof System?
A sedum green roof can be placed over the Rubberall EPDM membrane, provided that a root resistant geotextile is used between the vegetation and the membrane. A distance of 30 cm must be taken into account between the vegetation and every roof installation detail.
Is there a warranty for Rubberall EPDM membrane?
Yes, Rubberall provides a 20 / 30 year material warranty dependent on the thickness of the membrane.
Why do bubbles or wrinkles form after the membrane is fastened?
Solvents in the adhesives, which are not allowed to “flash off” or evaporate, cause distortions or bubbles. The wet adhesive distresses the membrane causing wrinkles. Depending on the substrate and the amount of wet adhesive, bubbles or distortions in the membrane will eventually be absorbed by the membrane and disappear.
Can the adhesive dry too long?
Yes. After the adhesive is applied and has flashed off, the surfaces should be mated together. Allowing the prepared surfaces to remain open longer than necessary risks contamination from dust and debris. High temperatures, as well as falling cool temperatures and moisture, can affect the performance of the adhesives if the prepared surfaces are left open too long.
Can I install outdoor carpet over an EPDM roof?
Yes. The best method is to fully attach the carpet using an exterior grade carpet adhesive.
Can I fasten EPDM to concrete or wood?
Yes. Both substrates should be free of splinters, burrs, loose fasteners, sharp edges, dust and debris.
What temperature is too cold for a successful installation?
Adhesives perform best at temperatures over 22.22°C. Below 22.22°C, it is best to install only on full sun days with low air moisture content. Application may only be possible during the middle part of the day when the temperature is stable and humidity is lowest. Rule of thumb: if it is comfortable to work in, you can install EPDM. It just takes longer for the adhesive to flash off.
Can I use Rubber Flat Roof EPDM below grade?
Yes. Rubber Flat Roof EPDM can be used below grade as a waterproofing membrane on basement walls, water retention ponds and earth homes. It is important that the substrate be free of burrs and sharp edges that could puncture the membrane. Earth homes and sidewalls should have a barrier board between the membrane and the backfill.
Is Rubber Flat Roof EPDM Membrane safe to use in ponds with aquatic life?
Yes, our membrane has been tested and has proven to be “Suitable for Aquatic Life”.
Can I install EPDM over smooth surface asphalt or shingle roofs?
Installing EPDM over old smooth surface asphalt or shingles is not recommended. The adhesives used to bond the membrane will activate “dead” asphalt and not bond properly. A retrofit or insulation board should be installed over the old substrate.
When I adhered the membrane, several wrinkles occurred. Will the wrinkles affect the roof?
Although wrinkles are unsightly, unless they traverse a seam, they will not leak. Large wrinkles can be cut out and patched. Small wrinkles might be absorbed into the membrane as it goes through several expansion/contraction cycles. Any wrinkles that migrate through a seam must be removed and repaired.
When should I use 1.2mm and when should I use 1.5mm EPDM membrane?
1.5mm membrane is recommended for roofing applications primarily for ease of installation. 1.2mm membrane as a roofing membrane should only be used by the experienced installer. Inexperienced installers will find that they encounter wrinkles when bonding the membrane. Cutting these wrinkles out take time and leaves a less pleasing roof appearance.
The1.2mm EPDM membrane is the product of choice for water retention ponds, below grade waterproofing and also for many other uses around the home, for example, sheds. Check out our EPDM Rubber Shed Kit here.